Guide for simple li...
 
Notifications
Clear all

[Sticky] Guide for simple linking Cantabile Rack to Buttons

3 Posts
1 Users
4 Likes
2,831 Views
Juergen
(@juergen)
Estimable Member
Joined: 5 years ago
Posts: 85
Topic starter  

2 Buttons linked    (here with Controller 40)

Buttons defined as Push and Blink Buttons

Button 1 = Value 1

Button 2= Value 2   (and so on...up to 127)

For MIDI in exactly the same values!

Example1

Next is the cantabile Rack (here only 2 states)

Line 1               is calling the state when a button is pushed

Line 2              is sending a number (to Rack out)  when a state is selected     (in this pic >> Controller40, Value 2)

Example2

Next is a filter that modulates the controller 40 >> all values will set to   0 = all Buttons off nothing is blinking

this controller is leaving at first then a copy of the original incoming value is following and setting the new Button to on.

Example3

Thats all.

This topic was modified 5 years ago 2 times by Juergen

   
Quote
Juergen
(@juergen)
Estimable Member
Joined: 5 years ago
Posts: 85
Topic starter  

Little bit playing at home with my controller to check out what I have to improve.....

Chameleon was the last fragment of my puzzle... The other parts: Lightjams, Cantabile Performer, ELM, Bome Translater


   
ReplyQuote
Juergen
(@juergen)
Estimable Member
Joined: 5 years ago
Posts: 85

   
ReplyQuote
Share: